Kia Sportage: 4WD ECU: Repair procedures - 4WD Control System - 4 Wheel Drive (4WD) System - Kia Sportage SL Service & Repair ManualKia Sportage: 4WD ECU: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / 4 Wheel Drive (4WD) System / 4WD Control System / 4WD ECU: Repair procedures

Replacement
   
Prior to replacing the 4WD ECU, check the 4WD ECU''s clutch learing with the GDS tool. (Refer to " Coupling assembly " in 4WD group)
1.
Remove the lower panel. (Refer to "Crash Pad" in BD group)
2.
Remove the IPM.(Refer to "Fuses and Relays" in BE group)
3.
Remove the parking brake pedal.(Refer to "Parking Brake System" in BR group)
4.
Remove the 4WD ECU(C) after removing the nut (A-2ea) and the connector (B).

Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

5.
Installation is the reverse of removal.
   
Prior to installing a new ECU, upload the original ECU’s clutch learing to the replacement ECU using the GDS tool. (Refer to " Coupling assembly " in 4WD group)
4WD ECU: Components and Components Location
Component Location 1. Crash pad2. Crash lower panel3. 4WD ECU ...

Coupling Assembly
...

Other Information:

To cancel cruise control, do one of the following
Press the brake pedal. Press the clutch pedal with a manual transaxle. Shift into N (Neutral) with an automatic transaxle. Push the CANCEL switch located on the steering wheel. Decrease t ...

A/C Pressure Transducer: Components and Components Location
Component Location ...

Categories


Copyright © www.kispmanual.com 2014-2024