Kia Sportage: A/C Pressure Transducer: Repair procedures
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / A/C Pressure Transducer: Repair procedures
| Inspection |
| 1. |
Measure the pressure of high pressure line by measuring voltage output between NO.1 and NO.2 terminals.
|
| 2. |
Inspect the voltage value whether it is sufficient to be regular value or not.
|
| 3. |
If the measured voltage value is not specification, replace the A/C pressure transducer. |
| Replacement |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Recover the refrigerant with a recovery/charging station. |
| 3. |
Disconnect the A/C pressure transducer connector (3P) (A).
|
| 4. |
Installation is the reverse order of removal. |
A/C Pressure Transducer: Description and Operation
Description
A/C pressure transducer convert the pressure value of high
pressure line into voltage value after it is measured. By voltage value,
the engine ECU controls cooling fan by operating ...
Evaporator Temperature Sensor: Description and Operation
Description
The evaporator temperature sensor will detect the evaporator
core temperature and interrupt compressor relay power in order to
prevent evaporator freezing by excessive cooling ...
Other Information:
Line Pressure Control Solenoid Valve: Specifications
Specifications
Direct control VFS[LINE Pressure]
? Control type : Normal high type
Control Pressure kpa (kgf/cm?, psi)500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Inter ...
Blower Unit: Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad and heater blower unit.
(Refer to HA group - "Heater Unit")
3.
Remove the heater blower unit (A) fro ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024