Kia Sportage: Antenna Coil: Repair procedures - Immobilizer System - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Antenna Coil: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Immobilizer System / Antenna Coil: Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A).

   
Take care not to damage and scratch the shrouds and its related parts.
Take care not to damage the hook when removing the upper and lower shrouds.
3.
Disconnect the 6P connector (B) of the coil antenna and then remove the coil antenna (A).

Installation
1.
Install the coil antenna and connect the 6P connector.
2.
Install the steering column upper and lower shrouds.
Immobilizer Control Unit: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") 3. Remove the steering column assembly. (Refer to the ...

Troubleshooting
Diagnosis Of Immobilizer Faults – Communication between the ECM and the SMARTRA. – Function of the SMARTRA and the transponder. – Data (stored in the ECM related to the i ...

Other Information:

Use high quality ethylene glycol coolant
Your vehicle is delivered with high quality ethylene glycol coolant in the cooling system. It is the only type of coolant that should be used because it helps prevent corrosion in the cooling syst ...

Heater & A/C Control Unit(Full Automatic): Components and Components Location
Component Connector Pin Function ConnectorPin NOFunctionConnectorPin NOFunctionConnector(A)1BatteryConnector(B)1CAN (LOW)2Tail Lamp (ILL+)2CAN (HIGH)3IG23Intake Actuator (F/B)4DR Temp Actuator ( ...

Categories


Copyright © www.kispmanual.com 2014-2024