Inspection |
1. |
Check for resistance between No.6 and No.7 terminals in each switch position.
[Audio System]
|
2. |
Check for voltage between No.6 and No.7 terminal in each switch position.
[Audio System]
|
Removal |
1. |
Remove the driver airbag module.
(Refer to the RT group - "Airbag module") |
2. |
Remove the steering wheel remote control switch mounting screws (2EA).
Disconnect the connector and remove the steering wheel remote control switch (A). |
Installation |
1. |
Install the audio remote control switch on the steering wheel. |
2. |
Reconnect the audio remote control switch connector and airbag connectors.
|
3. |
Install the driver airbag module.
|
Engine Control Module (ECM): Schematic Diagrams
ECM Terminal And Input/Output signal
ECM Terminal Function
Connector [CHTG-AG]
PinNo.DescriptionConnected to1Ignition Coil (Cylinder #2) control output [Without Smart Key]Ignition Coil (Cylin ...
Do not install a child restraint on the front passenger’s seat.
Never place a rear-facing child restraint in the front passenger’s seat. If the
air bag deploys, it would impact the rear-facing child restraint, causing serious
or fatal injury.
In addition, d ...