Removal |
1. |
Remove the knob. Remove the floor console upper cover (A) using the appropriate tool.
(Refer to the BD group - "Console") |
2. |
Loosen screws (2EA) and remove the floor console tray (A).
|
3. |
Disconnect the connectors (A) from the floor console tray. |
4. |
Remove the multimedia jack (A) from the floor console tray after pressing the hooks. |
Installation |
1. |
Install the multimedia jack. |
2. |
Install the floor console tray. |
3. |
Install the floor console upper cover. |
Antenna Coil: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column upper and lower shrouds (A).
Take care not to damage and scratch the shroud ...
Repair procedures
Inspection
1.
Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
2.
Check for continuity between the terminals.
3.
If continu ...