Kia Sportage: Blower Unit: Repair procedures
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Heating,Ventilation, Air Conditioning / Blower / Blower Unit: Repair procedures
| Replacement |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the crash pad and heater blower unit.
(Refer to HA group - "Heater Unit") |
| 3. |
Remove the heater blower unit (A) from crash pad.
|
| 4. |
Remove the blower unit (A) from the heater unit (B) after loosening a mounting bolt and screws.
|
| 5. |
Installation is the reverse order of removal. |
Blower Unit: Components and Components Location
Component Location
Components
1. Intake case (LH)2. Intake case (RH)3. Blower motor4. Intake door5. Intake actuator6. Mofet [Auto type]7. Resistor [Manual type]8. Climate control air filter cove ...
Blower Motor: Repair procedures
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor is not operating when voltage is applied,
substitute with a known-good blower motor and ...
Other Information:
Description and Operation
Function
Bluetooth Audio System
Bluetooth
You can use a Bluetooth device in your car to make a
hands-free phone call or to stream music onto your in-car speakers (via
this Head Unit). This ...
Specifications
Specifications
Fuel Delivery System
ItemsSpecificationFuel TankCapacity55 lit. (14.5 U.S.gal., 58.1 U.S.qt., 48.4 Imp.qt.)Fuel FilterTypePaper typeFuel PressureLow Pressure Fuel Line493 ~ 507 ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024