Kia Sportage: Body Control Module (BCM): Specifications

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / BCM (Body Control Module) / Body Control Module (BCM): Specifications

Specifications

Electrical Performance

Item	Requirement	Remark
Rated voltage	DC 12V
Operating voltage range	DC 9 ~ 16V	Shall activate normally in these range
Operating temperature range	-30°C ~ +80°C	Shall conserve normally in these range.
Storage temperature range	-40°C ~ +85°C	Shall conserve normally in these range.
Max humidity in use	95%
High voltage resistance	24V/1min, 18V/1hour	After overvoltage is the Normal behavior
Insulation resistance	100M? or more (measured with 500V MEGGER)	Specify as well as parts that insulation like PCB, moisture-proof COATING is required.
Quiescent current	KEYLESS spec : 6mA or less SMK spec : 5.5mA or less NON-KEYLESS : 4mA or less	Measure when the state, all output loads are OFF and there are no Input SW(including TX operation) changes, continues 2sec.
Voltage drop	1.2V or less	but, Terminal B9, B20, C1, C2, C3, C13, C14, C15, C16 is 2.0V or less.

BCM (Body Control Module)

...

Body Control Module (BCM): Schematic Diagrams

Circuit Diagram ...

Other Information:

Description and Operation
Refrigeration Cycle ...

3. Exhaust emission control system
The Exhaust Emission Control System is a highly effective system which controls exhaust emissions while maintaining good vehicle performance. Vehicle modifications This vehicle should not be modif ...

Kia Sportage: Body Control Module (BCM): Specifications

BCM (Body Control Module)

Body Control Module (BCM): Schematic Diagrams

Other Information:

Categories