Kia Optima Manuals

Kia Sportage: Console: Repair procedures - Interior - Body (Interior and Exterior) - Kia Sportage SL Service & Repair ManualKia Sportage: Console: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body (Interior and Exterior) / Interior / Console: Repair procedures

Replacement
Floor Console Replacement
[M/T]
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
1.
Using a screwdriver or remover, remove the gear boots (A).

2.
Using a screwdriver or remover, remove the console upper cover (A).

3.
After loosening the mounting screws, then remove the floor console tray (A).

4.
Disconnect the connector (A).

5.
Remove the console side cover (A).

6.
After loosening the mounting screws and bolts, then remove the floor console assembly (A).

7.
Installation is the reverse of removal.
   
•
Make sure the connector are connected in properly.
•
Replace any damage clips.
[A/T]
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
1.
Using a screwdriver or remover, remove the gear boots (B) and gear knob (A).

2.
Using a screwdriver or remover, remove the console upper cover (A).

3.
Disconnect the connector (A).

4.
After loosening the mounting screws, then remove the floor console tray (A).

5.
Disconnect the connector (A).

6.
Remove the console side cover (A).

7.
After loosening the mounting screws and bolts, then remove the floor console assembly (A).

8.
Disconnect the floor console main connector (A).

9.
Installation is the reverse of removal.
   
•
Make sure the connector are connected in properly.
•
Replace any damage clips.
Armrest Replacement
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
1.
Using a screwdriver or remover, remove the rear console cover (A).

2.
After loosening the mounting screws, then remove the armrest cover (A).

3.
After loosening the mounting screws, then remove the armrest assembly (A).

4.
Installation is the reverse of removal.
   
•
Replace any damage clips.
Console: Components and Components Location
Components [ M/T] 1. Floor console assembly2. Floor console tray3. Console upper cover [5 speed M/T]4. Console upper cover [6 speed M/T]5. Console storage box mat6. Console side cover [LH]7. C ...

Crash Pad: Components and Components Location
Components 1. Main crash pad assembly2. Crash pad side cover [LH]3. Crash pad side cover [RH]4. Cluster fascia panel5. Reinforcing panel6. Crash pad lower panel7. Center facia panel8. Crash pad g ...

Other Information:

Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be in your vehicle and vehicle c ...

Electrochromic Mirror (ECM)
The electric rearview mirror automatically controls the glare from the headlights of the vehicles behind you in nighttime or low light driving conditions. The sensor mounted in the mirror senses t ...

Categories


Copyright © www.kispmanual.com 2014-2024