Replacement |
1. |
Remove the wiper arm cover (B). |
2. |
After loosening the mounting nuts, then remove the wiper arm (A).
|
3. |
Remove the washer nozzle hose (B). |
4. |
Detach the clips, then remove the cowl top cover (A). |
5. |
Installation is the reverse of removal.
|
Fuel Pressure Control Valve: Repair procedures
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel ...
Shift Lever: Components and Components Location
Components
1. Shift lever knob & boots assembly2. Shift lever assembly3. Shift cable assembly4. Cable retainer5. Shift cable retainer
...