Inspection |
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the OCV connector. |
3. |
Measure resistance between the OCV terminals 1 and 2. |
4. |
Check that the resistance is within the specification.
|
Removal |
[Bank 1 / Intake] |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Remove the OTS (A). |
3. |
Disconnect the CVVT oil control valve connector (B). |
4. |
Remove the installation bolt (C), and then remove the valve from the engine. |
[Bank 1 / Exhaust] |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the CVVT oil control valve connector (A). |
3. |
Remove the installation bolt (B), and then remove the valve from the engine. |
Installation |
|
|
1. |
Installation is reverse of removal.
|
Troubleshooting
Troubleshooting
1.
No windows operate from the main switch on the driver''s door.
2.
Driver''s side window does not operate.
3.
Passenger''s side window does not operate. ...
Troubleshooting
Troubleshooting
Trouble symptomSuspect areaRemedy Shift delayBreakdown of clutch or brakeFaulty hydraulic controlFaulty hydraulic supply???Clutch, BrakeSolenoid valve, Valve bodyMechanical o ...