Kia Sportage: Description and Operation
Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Auto Lighting Control System / Description and Operation
| Description |
This function describes the following features
| – |
Input detection by Auto Light Sensor. |
| – |
Generate Auto Light Out Status data. |
| – |
Send Auto Light Out Status. |
| – |
Tail Lamp Control by Auto light Mode. |
| – |
Head Lamp Low Control by Auto light Mode. |
| – |
AV Tail Control by Auto Light sensor level. |
| • |
Auto Light Mode State Diagram is based on Auto Light Sensor''s level. |
| • |
Power condition of Auto Light Action |
| – |
When ACC, IGN, START terminal states, Auto Light Sensor operates. |
Schematic Diagrams
Circuit Diagram
...
Auto Light Sensor: Repair procedures
Inspection
In the state of IGN1 ON, when multi function switch module
detects auto light switch on, tail lamp relay output and head lamp low
relay output are controlled according to auto light ...
Other Information:
Direct Electro Hydraulic Actuator Coupling: Components and Components Location
Component Location
1. Automatic transaxle2. Transfer assembly3. Propeller shaft4. Coupling assembly5. Differential assembly
Components
1. Actuator2. Bleed valve3. Flange & Input shaft4. ...
Engine Control Module (ECM): Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the ECM Connector (A).
3.
Remove the battery (Refer to "Intake And Exhaust System" in EM gr ...
Categories
- Home
- Kia Sportage QL (2015-2019) Owners Manual
- Kia Sportage QL (2015-2019) Service Manual
- Kia Sportage SL 2010-2016 Owners Manual
- Kia Sportage SL 2010-2016 Service Manual
Copyright © www.kispmanual.com 2014-2024