Kia Sportage: Description and Operation
Exhaust emissions (CO, HC, NOx) are controlled by a
combination of engine modifications and the addition of special control
components.
Modifications to the combustion chamber, intake manifold, camshaft and ignition system form the basic control system.
These items have been integrated into a highly effective
system which controls exhaust emissions while maintaining good
drivability and fuel economy.
Air/Fuel Mixture Control System [Multiport Fuel Injection (MFI) System]
The MFI system uses signals from the heated oxygen sensor to
activate and control the injector installed in the manifold for each
cylinder, thus precisely regulating the air/fuel mixture ratio and
reducing emissions.
This in turn allows the engine to produce exhaust gas of the
proper composition to permit the use of a three way catalyst. The three
way catalyst is designed to convert the three pollutants [hydrocarbons
(HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless
substances. There are two operating modes in the MFI system.
1. |
Open Loop air/fuel ratio is controlled by information pre-programmed into the ECM. |
2. |
Closed Loop air/fuel ratio is constantly adjusted by the ECM based on information supplied by the oxygen sensor. |
Description
The catalytic converter of the gasoline engine is a three way
catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and
separates oxygen from the oxides of nitrogen (NOx).
T ...
Other Information:
Seat belt warning (for front passenger’s seat)
As a reminder to the front passenger, the front passenger's seat belt warning
light will blink for approximately 6 seconds each time you turn the ignition switch
ON regardless of belt fasten ...
Engine compartment fuse replacement
1.Turn the ignition switch and all other switches off.
2.Remove the fuse panel cover by pressing the tab and pulling the cover up. When
the blade type fuse is disconnected, remove it by using the ...