Kia Sportage: Differential Carrier Assembly

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Driveshaft and axle / Differential Carrier Assembly

Propeller Shaft: Repair procedures

Replacement 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts. Tightening torque : 49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6 ...

Rear Differential Carrier: Components and Components Location

Component 1. Drive pinion nut 2. Oil seal3. O-ring4. Oil seal5. Front bearing6. Spacer7. Rear bearing8. Inner shim9. Drive pinion gear10. Differential carrier11. Bearing cap12. Bearing cap bolt1 ...

Other Information:

Knock Sensor (KS): Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold (Refer to “Intake And Exhaust System” in EM group). 3. Disconnect the ...

Curtain Airbag (CAB) Module: Components and Components Location
Components ...