Kia Sportage: Fender: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body (Interior and Exterior) / Exterior / Fender: Repair procedures

Replacement

•	When removing and installing the fender, an assistant is necessary.

•	Be careful not to damage the fender and body.

•	When removing the clips, use a clip remover.

1.	Remove the front bumper cover. (Refer to the BD group – “Front bumper”)

2.	Loosen the mud guard (A) mounting screws and clips.

3.	After loosening the mounting screws and clips, then remove the side sill moulding (A).

4.	Detach the clips and then remove the insulator pad (A).

5.	After loosening the mounting screw and bolt, then remove the front bumper side mounting bracket (A).

6.	After loosening the mounting bolts, then remove the fender (A).

7.	Installation is the reverse of removal.

Hood: Repair procedures

Replacement Hood Assembly Replacement • When removing and installing the hood, an assistant is necessary. • Take care not to damaged the hood and bo ...

Other Information:

Remote control
Electric type The electric remote control mirror switch allows you to adjust the position of the left and right outside rearview mirrors. To adjust the position of either mirror the ignition sw ...

Weight of the trailer
What is the maximum safe weight of a trailer? It should never weigh more than the maximum trailer weight with trailer brakes. But even that can be too heavy. It depends on how you plan to use you ...

Kia Sportage: Fender: Repair procedures

Exterior

Hood: Repair procedures

Other Information:

Categories