Front windshield wiper blade
1.Raise the wiper arm and turn the wiper blade assembly to expose the plastic
locking clip.
CAUTION - Wiper arms
Do not allow the wiper arm to fall against the windshield, since it may chip ...
Canister Close Valve (CCV): Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and 2.
4.
Check that the resistance is within the specific...
Wheel: Repair procedures
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
When using an impact gun, fi...