Front Body A |
Hood hinge mounting hole (O12) | Fender apron upper panel tooling hole (O8) | Front suspension mounting hole (O11) |
Side outer panel corner | Front pillar corner | Cowl panel tooling hole (O10) |
Front Body B |
Hood hinge mounting hole (O12) | Fender apron upper panel tooling hole (O8) | Engine mounting bracket hole (O12) |
Transaxle mounting hole (O16) | Engine mounting bracket hole (O14) | Transaxle mounting hole (O16) |
Front side member tooling hole (O10) | Front side member tooling hole (10X14) | Front end module mounting hole (O9) |
Front end module mounting hole (O9) |
Front Body C |
Engine mounting bracket hole (O12) | Transaxle mounting hole (O16) | Engine mounting bracket hole (O14) |
Transaxle mounting hole (O16) | Front side member tooling hole (O14) | Front side member tooling hole (14X10) |
Releasing the parking brake
Foot type
To release the parking brake, depress the parking brake pedal a second time while
applying the foot brake. The pedal will automatically extend to the fully released
position.
Hand ...
Mode Control Actuator: Description and Operation
Description
The mode control actuator is located at the heater unit.
It adjusts position of mode door by operating mode control
actuator based on signal of A/C control unit. Pressing mode select ...