Inspection |
1. |
With the fog lamp switch in each position, make sure that
continuity exists between the terminals below. If continuity is not as
specified, replace the multifunction switch. |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front bumper.
(Refer to the BD group - "Front bumper") |
3. |
Remove the front fog lamp (A) by turning in the counterclockwise direction after disconnecting the connector. |
4. |
Remove the front fog lamp (B) after loosening the screws. |
Installation |
1. |
Install the front fog lamp bulb. |
2. |
Connect the front fog lamp connector. |
3. |
Install the front bumper. |
Condenser: Components and Components Location
Component Location
...
Intercooler: Components and Components Location
Components
1. Recirculation hose2. Intercooler inlet hose & pipe assembly3. Intercooler outlet hose & pipe assembly4. Intercooler mounting bracket5. Intercooler upper mounting insulator6. ...