Kia Sportage: Front Impact Sensor (FIS): Description and Operation
The front impact sensor (FIS) is installed in the Front End
Module (FEM). They are remote sensors that detect acceleration due to a
collision at its mounting location. The primary purpose of the Front
Impact Sensor (FIS) is to provide an indication of a collision. The
Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Disconnect the DAB, PAB, SAB, CA ...
Other Information:
Manifold Absolute Pressure Sensor (MAPS): Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification: Refer to "Specification"
Removal
1.
Tur ...
Specifications
Specifications
ItemsSpecificationsRated voltage5VLoadMax. 1mADetection illuminationsTail lampON : 1.57 ± 0.10 (V)OFF : 2.56 ± 0.20 (V)Head lampON : 1.57 ± 0.10 (V)OFF : 2.56 ± 0.20 (V)
...