Removal |
|
1. |
Disconnect the battery negative cable, and wait for at least three minutes before beginning work. |
2. |
Remove the air duct (A) and air cleaner assembly (B). (Driver front impact sensor only) |
3. |
Disconnect the front impact sensor connector (A). |
4. |
Remove the front impact sensor mounting bolt (B). |
5. |
Remove the front impact sensor. |
Installation |
|
1. |
Install the new front impact sensor. |
2. |
Tighten the front impact sensor mounting bolt.
|
3. |
Connect the front impact sensor connector. |
4. |
Install the air duct and air cleaner assembly. (Driver front impact sensor only) |
5. |
Reconnect the battery negative cable. |
6. |
After installing the Front Impact Sensor, confirm proper system operation:
|
Securing a child restraint seat with tether anchor system
Child restraint hook holders are located on the back of the rear seatbacks.
1.Route the child restraint seat strap over the seatback.
For vehicles with adjustable headrests, route the tether str ...
Front Lower Arm: Repair procedures
Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 07.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub bo ...