A ratchet tightening device on the threaded fuel filler cap
reduces the chances of incorrect installation, which seals the fuel
filler. After the gasket on the fuel filler cap and the filler neck
flange contact each other, the ratchet produces a loud clicking noise
indicating the seal has been set.
Removal
1.
Remove the fuel tank. (Refer to "Fuel tank" in FL group.)
2.
Disconnect the vapor tube quick-connector (B) and the ventilation hose (A).
3.
Remove the canister in the direction ...
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Lift the vehicle with a jack.
3.
Disconnect the canister close valve connector (A).
4.
Disconn ...
Other Information:
Smart key unit: Repair procedures
Removal
Smart Key Unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box.
(Refer to the BD group - "Crash pad")
3.
After disconnecting the smart key unit connector ...
Rear Door: Repair procedures
Replacement
Door Trim Replacement
•
Take care not to scratch the door trim and other parts.
•
Put on gloves to protect your hands.
1.
Using a sc ...