Inspection |
1. |
Check the handsfree remote control switch for resistance between No.3 and No.4 terminals in each switch position.
[Call + Hang Up]
[Voice]
|
Removal |
1. |
Remove the driver airbag module.
(Refer to the RT group - "Airbag module") |
2. |
Remove the steering wheel.
(Refer to the ST group - "Steering column and shaft") |
3. |
Remove the steering lower bezel (A) after loosening 2 screws and connector (B). |
4. |
Remove the handsfree remote control switch. |
Installation |
1. |
Install the handsfree remote switch to the steering wheel bezel. |
2. |
Install the steering wheel and bezel. |
3. |
Reconnect the handsfree remote control switch connector and airbag connectors.
|
4. |
Install the driver airbag module. |
Do not lie down
To reduce the chance of injuries in the event of an accident and to achieve maximum
effectiveness of the restraint system, all passengers should be sitting up and the
front and rear seats should b ...
Schematic Diagrams
System Block Diagram
Component Parts And Function Outline
Component partFunctionVehicle-speed sensorConverts vehicle speed to pulse.ECMReceives signals from sensor and control switches.Cruise co ...