The hazard warning flasher should be used whenever you find it necessary to stop the vehicle in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible.
The hazard warning lights are turned on by pushing in the hazard switch. Both turn signal lights will blink. The hazard warning lights will operate even though the key is not in the ignition switch.
To turn the hazard warning lights off, push the switch again.
WARNING - Backing & using camera
Never rely solely on the rear view camera when backing. You must always use methods of viewing the area behind you including looking over both shoulders as well as continuously checking all three rear view mirrors. Due to the difficulty of ensuring that the area behind you remains clear, always back slowly and stop immediately if you even suspect that a person, and especially a child, might be behind you.
Turn signals when towing a trailer
When you tow a trailer, your vehicle has to have a different turn signal flasher
and extra wiring. The green arrows on your instrument panel will flash whenever
you signal a turn or lane change. P ...
Master Cylinder: Components and Components Location
Components
1. Reservoir cap2. Reservoir3. Grommet4. Master cylinder
...