Inspection |
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the HO2S connector. |
3. |
Measure resistance between the HO2S terminals 4 and 5 [B1/S1]. |
4. |
Measure resistance between the HO2S terminals 3 and 4 [B1/S2]. |
5. |
Check that the resistance is within the specification.
|
Removal |
[Bank 1 / Sensor 1] |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the connector (A), and then remove the sensor (B).
|
[Bank 1 / Sensor 2] |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Remove the console side cover (A). |
3. |
Disconnect the connector (A), and then remove the sensor (B).
|
Installation |
|
|
1. |
Installation is reverse of removal.
|
Components and Components Location
Component Location
1. Back view camera2. ECM mirror
...
CVVT Oil Temperature Sensor (OTS): Specifications
Specification
Temperature [°C(°F)]Resistance (k?)-40(-40)52.15-20(-4)16.520(32)6.020(68)2.4540(104)1.1160(140)0.5480(176)0.29
...