Kia Sportage: Heated Oxygen Sensor (HO2S): Schematic Diagrams

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Control / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S): Schematic Diagrams

Heated Oxygen Sensor (HO2S): Specifications

Specification HO2S [Bank 1/Sensor 1] ItemSpecificationHeater Resistance (?)2.5 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] A/F Ratio (?)Output Voltage(V)RICHApprox. 0.9LEANApprox. 0.04 ...

Heated Oxygen Sensor (HO2S): Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 4 and 5 [B1/S1]. 4. Measure resistance between the HO2S t ...

Other Information:

Shift Cable: Repair procedures
Inspection 1. Check the damage and operation of the control cable. 2. Check the damage of the boot. 3. Check the damage and corrosion of the bushing. 4. Check the damage or weakening o ...

Limitation of Active ECO operation
If the following conditions occur while Active ECO is operating, the system operation is limited even though there is no change in the ECO indicator. When the coolant temperature is low: The sys ...