Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Recover the refrigerant with a recovery/ recycling/ charging station. |
3. |
When the engine is cool, drain the engine coolant from the radiator. |
4. |
Remove the expansion valve cover (A). |
5. |
Remove the bolts (A) and the expansion valve (B) from the evaporator core.
|
6. |
Remove the expansion valve flange (A). |
7. |
Disconnect the inlet (C) and outlet (D) heater hoses from the heater unit.
|
8. |
Remove the cowl top cover.
(Refer to BD group - "Cowl Top Cover"). |
9. |
Loosen the cowl cross member mounting bolts (A). |
10. |
Remove the steering handle and column.
(Refer to ST group - "Steering Column") |
11. |
Remove the center console.
(Refer to BD group - "Center Console") |
12. |
Disconnect the airbag connector (A). |
13. |
Disconnect the connectors and then remove the left & right multi box (A). |
14. |
Remove the left & right filler trim and than disconnect the connector (A). |
15. |
Remove the heater & blower unit after loosening mounting bolts (A). |
16. |
Loosen the cowl cross member mounting bolts (A) and then remove the crash pad and heater blower unit. |
17. |
Disconnect the connectors and then remove the heater blower unit (A) from crash pad. |
18. |
Remove the blower unit (A) from heater unit (B) after loosening screws. |
19. |
Loosen the mounting screw and then remove the heater core cover (A). |
20. |
Disconnect the heater core (A) from heater unit. |
21. |
Loosen the heater unit lower case mount screw and then remove the heater unit lower case (A). |
22. |
Remove the evaporator core (A). |
23. |
Be careful that the inlet and outlet pipe are not bent during heater core removal, and pull out the heater core. |
24. |
Installation is the reverse order of removal. |
25. |
Installation is the reverse order of removal, and note these items :
|
Filler-Neck Assembly: Repair procedures
Removal
1.
Remove the rear-LH wheel, tire, and the inner wheel house.
2.
Disconnect the fuel filler hose (A) and the ventilation hose (B).
3.
Open the fuel filler door and unfasten the fil ...
Driver Airbag (DAB) Module and Clock Spring: Description and Operation
Description
Driver Airbag (DAB) is installed in the steering wheel and
electrically connected to SRSCM via the clock spring. It protects the
driver by deploying the airbag when frontal crash oc ...