Kia Sportage: High Mounted stop lamp: Repair procedures - Lighting System - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: High Mounted stop lamp: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Lighting System / High Mounted stop lamp: Repair procedures

Removal
High Mounted Stop Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tailgate trim.
(Refer to the BD group - "Tailgate")
3.
Remove the spoiler.
(Refer to the BD group - "Tailgate")
4.
Remove the high mounted stop lamp assembly (B) after disconnecting the connector (A).

Installation
1.
Install the high mounted stop lamp and washer nozzle.
2.
Install the spoiler and tailgate trim.
License Lamps: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the lens (A) and license lamp (B) after loosening 2 screws. Installation 1. Install the bulb. 2. Install the license ...

Luggage Room Lamp: Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage room lamp (B) when prying the hole (A) with a flat-up screwdriver. 3. Remove the luggage room lamp bulb in ca ...

Other Information:

To set cruise control speed
1.Push the cruise ON-OFF button on the steering wheel, to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate. 2.Accelerate to the desired speed, which must b ...

Occupant Detection System (ODS)
Your vehicle is equipped with an occupant detection system in the front passenger's seat. The occupant detection system is designed to detect the presence of a properly-seated front passeng ...

Categories


Copyright © www.kispmanual.com 2014-2024