Removal |
In case of removing the high pressure fuel pump, high
pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by leakage of the high pressure fuel. So don’t do any repair
work right after engine stops.
|
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
|
3. |
Remove the air cleaner and the air intake hose (Refer to “Intake And Exhaust System” in EM group). |
4. |
Disconnect the fuel pressure regulator valve connector (A). |
5. |
Remove the ignition coil (B). |
6. |
Disconnect the fuel feed tube quick-connector (A). |
7. |
Remove the high pressure fuel pipe.
|
8. |
Remove the installation bolts (E), and then remove the high pressure fuel pump from the cylinder head assembly.
|
Installation |
|
|
|
|
|
|
|
|
1. |
Installation is reverse of removal.
|
Four wheel drive (4WD)
Engine power can be delivered to all front and rear wheels for maximum traction.
4WD is useful when extra traction is required on road, such as, when driving on
slippery, muddy, wet, or snow-cover ...
Front Washer Motor: Repair procedures
Inspection
Front Washer Motor
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with washer fluid.
Before filling the reservoir tank ...