Inspection |
1. |
There should be continuity between the No.11 in the A and
No.12 in the A terminals when power and ground are connected to the No.2
in the A and No.11 in the A terminals. |
2. |
There should be no continuity between the No.11 in the A and No.12 in the A terminals when power is disconnected. |
1. |
There should be continuity between the No.3 in the A and No.8
in the A terminals when power and ground are connected to the No.5 in
the A and No.6 in the A terminals. |
2. |
There should be no continuity between the No.3 in the A and No.8 in the A terminals when power is disconnected. |
1. |
There should be continuity between the No.17 in the A and
No.18 in the A terminals when power and ground are connected to the
No.16 in the A and No.17 in the A terminals. |
2. |
There should be no continuity between the No.17 in the A and No.18 in the A terminals when power is disconnected. |
Battery Sensor: Description and Operation
Description
Vehicles have many control units that use more electricity.
These units control their own system based on information from diverse
sensors. It is important to have a stable power su ...
OFF
• With automatic transaxle
To turn off the engine (START/RUN position) or vehicle power (ON position), press
the ENGINE START/STOP button with the shift lever in the P (Park) position. When
you ...