Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad") |
3. |
Remove the steering column assembly.
(Refer to the ST group - "steering column & shaft") |
4. |
Disconnect the connector of the SMARTRA unit and then remove the SMARTRA unit (A) after loosening a bolt.
[USA]
[Canada]
Disconnect the connector of the SMARTRA unit(A) and then remove the bracket and immobilizer unit. |
Installation |
1. |
Install the immobilizer control unit after connecting the unit connector. |
2. |
Install the steering column assembly. |
3. |
Install the crash pad lower panel. |
Front Impact Sensor (FIS): Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front impac ...
Windows
(1) Driver’s door power window switch
(2) Front passenger’s door power window switch
(3) Rear door (left) power window switch
(4) Rear door (right) power window switch
(5) Window opening and clo ...