Kia Sportage: Injector: Specifications - Engine Control System - Engine Control / Fuel System - Kia Sportage SL Service & Repair ManualKia Sportage: Injector: Specifications

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Control / Fuel System / Engine Control System / Injector: Specifications

Specification
Item
Specification
Coil Resistance (?)
1.25 [20°C(68°F)]

Injector: Description and Operation
Description Based on information from various sensors, the ECM can calculate the fuel amount to be injected. The fuel injector is a solenoid-operated valve and the fuel injection amount is cont ...

Injector: Troubleshooting
Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is fro ...

Other Information:

Receiver-Drier: Repair procedures
Replacement 1. Remove the condenser, and then remove the bottom cap (B) with L wrench (A) from the condenser. Tightening torque : 20~25N.m (2.0~2.5kgf.m, 14.5~18.2lb-ft) 2. Remove the ...

Repair procedures
Fuel Pressure Test (Low pressure system) 1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line"). ...

Categories


Copyright © www.kispmanual.com 2014-2024