Intake Air Temperature Sensor (IATS) is included inside
Manifold Absolute Pressure Sensor and detects the intake air
temperature.
To calculate precise air quantity, correction of the air
temperature is needed because air density varies according to the
temperature. So the ECM uses not only MAPS signal but also IATS signal.
This sensor has a Negative Temperature Coefficient (NTC) Thermister and
it''s resistance changes in reverse proportion to the temperature.
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification: Refer to "Specification"
Removal
1.
Tur ...
Removable towing hook
Front
Rear
1.Open the tailgate, and remove the towing hook from the tool case.
2.Remove the hole cover pressing the lower part of the cover on the bumper.
3.Install the towing hook by turning ...
Components and Components Location
Component Location
1. Horn switch2. Horn relay (Engine room compartment)3. Horn (Low pitch)4. Clock spring
...