Inspection |
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the IATS connector. |
3. |
Measure resistance between the IATS terminals 3 and 4. |
4. |
Check that the resistance is within the specification.
|
Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the manifold absolute pressure sensor connector (A). |
3. |
Remove the installation bolts (B), and then remove the sensor from the surge tank. |
Installation |
|
|
1. |
Installation is reverse of removal.
|
Transaxle ranges
The indicator in the instrument cluster displays the shift lever position when
the ignition switch is in the ON position.
P (Park)
Always come to a complete stop before shifting into P (Park). Thi ...
Rear Bumper: Components and Components Location
Components
1. Front bumper cover2. Front bumper side bracket [RH]3. Front bumper side bracket [LH]
...