Kia Sportage: Intercooler: Components and Components Location - Intake And Exhaust System - Engine Mechanical System - Kia Sportage SL Service & Repair ManualKia Sportage: Intercooler: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Mechanical System / Intake And Exhaust System / Intercooler: Components and Components Location

Components

1. Recirculation hose
2. Intercooler inlet hose & pipe assembly
3. Intercooler outlet hose & pipe assembly
4. Intercooler mounting bracket
5. Intercooler upper mounting insulator
6. Intercooler
7. Intercooler lower mounting insulator

Turbo Charger: Repair procedures
On-vehicle Inspection Turbocharger Diagnostic Flow If any problem related with turbocharger, such as lack of engine power, poor acceleration, abnormal engine noise or oil leaks, may occur, c ...

Intercooler: Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal (A). Tightening torque 4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft) 2. Remove the air cleaner assembly. (1) Remove ...

Other Information:

Turbo Charger: Components and Components Location
Components 1. Turbine housing2. Turbine inlet3. Turbine outlet4. Compressor housing5. Compressor inlet6. Compressor outlet7. Center housing8. EWGA (Electric Waste Gate Actuator)9. Actuator rod ...

Closing the hood
1.Before closing the hood, check the following: All filler caps in the engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the ...

Categories


Copyright © www.kispmanual.com 2014-2024