Removal and Installation |
1. |
Disconnect the battery negative terminal (A).
|
2. |
Remove the air cleaner assembly.
|
3. |
Disconnect the recirculation valve connector (A) and the
vacuum hose (B), and then remove the intercooner inlet pipe & hose
assembly (C). |
4. |
Disconnect the boost pressure sensor connector (A) and then remove the intercooler outlet pipe & hose assembly (B).
|
5. |
Remove the under cover (A).
|
6. |
Remove the front bumper. (Refer to BD group) |
7. |
Remove the front bumper upper stiffner (A). |
8. |
Remove the radiator upper cover (A). |
9. |
Remove the intercooler upper mounting bracket (A) and then remove the intercooler (B).
|
10. |
Installation is reverse order of removal. |
Four wheel drive (4WD)
Engine power can be delivered to all front and rear wheels for maximum traction.
4WD is useful when extra traction is required on road, such as, when driving on
slippery, muddy, wet, or snow-cover ...
Heater & A/C Control Unit(Full Automatic): Repair procedures
Self Diagnosis
1.
Self-diagnosis process
2.
How to read self-diagnostic code
After the display panel flickers three times every 0.5
second, the corresponding fault code flickers on the setu ...