Kia Sportage: License Lamps: Repair procedures - Lighting System - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: License Lamps: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Lighting System / License Lamps: Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the lens (A) and license lamp (B) after loosening 2 screws.

Installation
1.
Install the bulb.
2.
Install the license lamp lens.
Front Fog Lamps: Repair procedures
Inspection Front Fog Lamp Switch 1. With the fog lamp switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the mul ...

High Mounted stop lamp: Repair procedures
Removal High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim. (Refer to the BD group - "Tailgate") 3. Remove the spoiler. (Refer to the ...

Other Information:

Specifications
Specifications Smart Key Unit ItemsSpecificationRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-22°F ~ 167°F (-30°C ~ 75°C)LoadMax. 3mA RF Receiver ItemsSpecificationFr ...

Tight corner brake effect
Tight corner brake effect is a unique characteristic of four-wheel drive vehicles caused by the difference in tire rotation at the four wheels and the zero-degree alignment of the front wheels and ...

Categories


Copyright © www.kispmanual.com 2014-2024