Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the luggage room lamp (B) when prying the hole (A) with a flat-up screwdriver. |
3. |
Remove the luggage room lamp bulb in case of necessity. |
Installation |
1. |
Replace the lamp bulb. |
2. |
Install the luggage room lamp assembly after connecting the lamp connector. |
In the event of brake failure
If service brakes fail to operate while the vehicle is in motion, you can make
an emergency stop with the parking brake. The stopping distance, however, will be
much greater than normal.
WARN ...
Rear Differential Carrier: Components and Components Location
Component
1. Drive pinion nut 2. Oil seal3. O-ring4. Oil seal5. Front bearing6. Spacer7. Rear bearing8. Inner shim9. Drive pinion gear10. Differential carrier11. Bearing cap12. Bearing cap bolt1 ...