Inspection |
1. |
Connect the GDS on the Data Link Connector (DLC). |
2. |
Measure the output voltage of the MAPS at idle and IG ON.
|
Removal |
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the manifold absolute pressure sensor connector (A). |
3. |
Remove the installation bolts (B), and then remove the sensor from the surge tank.
[MAPS #1]
[MAPS #2] |
Installation |
|
|
1. |
Installation is reverse of removal.
|
Disarmed stage
The system will be disarmed when the doors (and tailgate) are unlocked with the
transmitter (or smart key) or the ignition key.
After depressing the unlock button, the hazard warning lights will bl ...
Air bag - advanced supplemental restraint system
(1) Driver’s front air bag
(2) Passenger’s front air bag
(3) Side impact air bag
(4) Curtain air bag
Even in vehicles with air bags, you and your passengers must always wear the
safety belts p ...