Kia Sportage: Non-operational conditions of Back up warning system - Back up warning system - Features of your vehicle - Kia Sportage SL Owners ManualKia Sportage: Non-operational conditions of Back up warning system

Third generation SL (2010–2016) / Kia Sportage SL Owners Manual / Features of your vehicle / Back up warning system / Non-operational conditions of Back up warning system

The Back up warning system may not operate properly when:

1.Moisture is frozen to the sensor. (It will operate normally when the moisture has been cleared.)

2.The sensor is covered with foreign matter, such as snow or water, or the sensor cover is blocked. (It will operate normally when the material is removed or the sensor is no longer blocked.)

3.Driving on uneven road surfaces (unpaved roads, gravel, bumps, gradient).

4.Objects generating excessive noise (vehicle horns, loud motorcycle engines, or truck air brakes) are within range of the sensor.

5.Heavy rain or water spray exists.

6.Wireless transmitters or mobile phones are within range of the sensor.

7.The sensor is covered with snow.

8.Trailer towing

The detecting range may decrease when:

1.The sensor is stained with foreign matter such as snow or water. (The sensing range will return to normal when removed.)

2.Outside air temperature is extremely hot or cold.

The following objects may not be recognized by the sensor:

1.Sharp or slim objects such as ropes, chains or small poles.

2.Objects which tend to absorb the sensor frequency such as clothes, spongy material or snow.

3.Undetectable objects smaller than 1 m (40 in.) in height and narrower than 14 cm (6 in.) in diameter.

Operation of the Back up warning system
Operating condition This system will activate when backing up with the ignition switch ON. If the vehicle is moving at a speed over 10 km/h (6 mph), the system may not be activated correctl ...

Back up warning system precautions
The Back up warning system may not sound consistently depending on the speed and shapes of the objects detected. The Back up warning system may malfunction if the vehicle bumper height or s ...

Other Information:

Delivery Pipe: Repair procedures
Removal     In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pre ...

Evaporator Temperature Sensor: Description and Operation
Description The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator freezing by excessive cooling ...

Categories


Copyright © www.kispmanual.com 2014-2024