Inspection |
If you have trouble code related to the oil hydraulic
motor(actuator) (P1825, P1826, P1827, P1828), check oil hydraulic motor
(actuator) according to the inspection process.
|
Oil Hydraulic Motor (Actuator) Inspection Procedure |
Removal |
1. |
Remove the coupling assembly.
(Refer to "coupling assembly" in 4WD group) |
2. |
Keep going perpendicular state after remove the coupling assembly.
|
3. |
Remove the hydraulic motor (actuators) after loosening bolts with hex wrench.
|
Installation |
1. |
Before installation, wipe the surface with a clean cloth. |
2. |
Check the O-rings of the new hydraulic motor (actuators).
|
3. |
Tighten the bolts after install the hydraulic motor (actuators).
|
4. |
Wipe the flowed oil to around the surface with a clean cloth. |
5. |
Measure the weight of the coupling.
|
Thermostat: Repair procedures
Removal and Installation
Disassembly of the thermostat would have an adverse effect,
causing a lowering of cooling efficiency. Do not remove the thermostat,
even if ...
Electric Waste Gate Actuator (EWGA): Description and Operation
Desrcription
The Electric WGT Control Actuator is installed on the turbocharger.
It operates the vain in the Waste Gate Turbocharger (WGT) and
regulates the compressed air amount by the ECM''s P ...