Replacement |
1. |
Remove the driveshaft assembly. (RH side)
(Refer to "Front Driveshaft" in Driveshaft and axle) |
2. |
Remove the dust cover (A). |
3. |
Remove the oil seal (A, B). |
4. |
Install the oil seal with special service tools.
|
5. |
Install the new dust cover (A). |
6. |
Add to transfer fluid.
(Refer to "Transfer Fluid" in Front Wheel Transfer Assembly of this group) |
7. |
Install the drive shaft assembly. (RH side)
(Refer to "Front Driveshaft" in Driveshaft and axle) |
1. |
Remove the transfer assembly from the transaxle assembly.
(Refer to "Front Wheel Transfer Assembly" in this group) |
2. |
Remove the oil seal (A). |
3. |
Install the oil seal with special service tools (09473-3B100).
|
4. |
Add to transfer fluid.
(Refer to "Transfer Fluid" in Front Wheel Transfer Assembly of this group) |
5. |
Install the transfer assembly.
(Refer to "Front Wheel Transfer Assembly" in this group) |
Propeller Shaft: Repair procedures
Replacement
1.
After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts.
Tightening torque :
49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6 ...
Description and Operation
Description
The 6-speed automatic transaxle consists of an overdrive
clutch (OD/C), a one-way clutch (OWC), a lower and reverse brake (LR/B),
an underdrive brake (UD/B), a 26 brake (26/B), and ...