Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the overhead console lamp assembly.
(Refer to the BD group - "Roof trim") |
3. |
Check for continuity between the terminals. If the continuity is not as specified, replace the sunroof switch. |
Components and Components Location
Components Location
1. Receiver2. TPMS Sensor3. TPMS Sensor4. TPMS Sensor5. TPMS Sensor
...
FLEX Steer
The FLEX Steer controls steering effort as driver's preference or road condition.
You can select the desired steering mode by pressing the FLEX Steer button.
The FLEX Steer stays in the last m ...