Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the floor console assembly.
(Refer to BD group - "Console") |
3. |
Remove the PDM relay box (A) after loosening the bolts (2EA) and disconnecting the connector. |
Installation |
1. |
Install the PDM relay box. |
2. |
Install the floor console assembly. |
3. |
Connect the battery (-) cable. |
Inspection |
1. |
There should be continuity between the No.1 and No.2
terminals in the B connector when power and ground are connected to the
No.3 and No.4 terminals in the A connector. |
2. |
There should be no continuity between the No.1 in the B and No.2 terminals in the B terminals when power is disconnected. |
1. |
There should be continuity between the No.7 and No.8
terminals in the A connector when power and ground are connected to the
No.3 and No.10 terminals in the A connector. |
2. |
There should be no continuity between the No.7 in the A and No.8 terminals in the A terminals when power is disconnected. |
1. |
There should be continuity between the No.7 and No.6
terminals in the A connector when power and ground are connected to the
No.1 and No.3 terminals in the A connector. |
2. |
There should be no continuity between the No.7 in the A and No.6 terminals in the A terminals when power is disconnected. |
Description and Operation
Cruise Control
The cruise control system is engaged by the cruise "ON/OFF"
main switch located on right of steering wheel column. The system has
the capability to cruise, coast, accelerate and ...
Cylinder Head: Components and Components Location
Components
1. Camshaft bearing cap2. Camshaft front bearing cap3. Exhaust camshaft4. Intake camshaft5. Exhaust CVVT assembly6. Intake CVVT assembly7. Exhaust camshaft upper bearing8. Exhaust cams ...