Inspection |
1. |
Disconnect the negative battery terminal. |
2. |
Remove the front door trim.
(Refer to the BD group - "Front door") |
3. |
Disconnect the switch connector (16 pins) from wiring harness. |
4. |
Check for continuity between the terminals. If needed, replace the switch. |
Removal |
1. |
Disconnect the negative battery terminal. |
2. |
Remove the front door trim.
(Refer to the BD group - "Front door") |
3. |
Remove the screws from power window switch (A) and connectors (B). |
4. |
Remove the driver power window switch (A) from front door trim.
|
Installation |
1. |
Install the power window switch and connectors. |
2. |
Install the front door trim. |
Accelerator Position Sensor (APS): Description and Operation
Description
Accelerator Position Sensor (APS) is installed on the
accelerator pedal module and detects the rotation angle of the
accelerator pedal. The APS is one of the most important sensors ...
Instrument Cluster: Components and Components Location
Components
...