Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front door delta cover.
(Refer to the BD group - "Front door") |
3. |
Disconnect the connector from the door mirror. |
4. |
Verify that the mirror operates properly as shown in the table.
Mirror Heater
Turn Signal Lamp
Mirror Folding |
Fan speed control
The ignition switch must be in the ON position for fan operation.
The fan speed control knob allows you to control the fan speed of the air flowing
from the ventilation system. To change the fan ...
Intake Air Temperature Sensor (IATS): Schematic Diagrams
Circuit Diagram
...