Inspection |
1. |
Remove the front seat.
(Refer to BD group - "Front seat") |
2. |
Disconnect the connectors for each motor. |
3. |
With the battery connected directly to the motor terminals, check if the motors run smoothly. |
4. |
Reverse the connections and check that the motor turns in reverse. |
5. |
If there is an abnormality, replace the motors. |
Instrument Cluster: Schematic Diagrams
Circuit Diagram (1)
Circuit Diagram (2)
CLU1 message signal flow (B > C CAN gateway)
CLU2 message signal flow (B > C CAN gateway)
CLU message 1 signal flow (C > B CAN gateway)
CLU message 3 signa ...
USING THE iPod® DEVICE
Some iPod® models may not support communication protocol and files may not
properly play. Supported iPod® models:
- iPhone® 3GS/4
- iPod® "Touch" 1st~4th generation
- iPod® " ...