Kia Sportage: Radiator: Components and Components Location - Cooling System - Engine Mechanical System - Kia Sportage SL Service & Repair ManualKia Sportage: Radiator: Components and Components Location

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Engine Mechanical System / Cooling System / Radiator: Components and Components Location

Components

1. Cooling fan assembly
2. Radiator assembly
3. Mounting insulator
4. Radiator mounting bracket
5. Radiator upper hose
6. Radiator lower hose
7. Reservoir tank
8. Over flow hose
9. ATF cooler hoses

Coolant: Repair procedures
Refilling And Bleeding     Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the rad ...

Radiator: Repair procedures
Inspection Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. Apply a pressure of 93.16 ~ 122.58kPa (0.95 ~ 1.25kg ...

Other Information:

Folding the rear seat
The rear seatbacks can be folded to facilitate carrying long items or to increase the luggage capacity of the vehicle. WARNING Never allow passengers to sit on top of the folded down seatback ...

Driver Airbag (DAB) Module and Clock Spring: Repair procedures
Removal 1. Set the front tires straight-ahead before removing the steering wheel.     If the steering wheel and the front tires are not set straight ahead together, it ...

Categories


Copyright © www.kispmanual.com 2014-2024