Side outer panel rear corner | Tail gate hinge mounting hole (O12) | Tail gate lifter mounting hole (O9) |
Side outer panel rear corner | Rear bumper mounting hole (8.5X8.5) | Rear bumper mounting hole (14X16) |
Rear bumper mounting hole (14X16) |
Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat
belts.The purpose of the pre-tensioner is to make sure that the seat belts fit tightly
against the occupan ...
Intake Air Temperature Sensor (IATS): Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the speci ...