Replacement |
|
1. |
After loosening the mounting screws, then remove the rear combination lamp (A). |
2. |
Push the lock pin, disconnect the connector (B). |
3. |
After loosening the rear bumper side’s mounting screws and clip, then disconnect the side’s. |
4. |
Loosen the mounting bolts. |
5. |
After loosening the mounting screws and clip, then remove the rear bumper (A). |
6. |
Push the lock pin, disconnect the rear bumper main connector (A). |
7. |
Installation is the reverse of removal.
|
Opening the tailgate
The tailgate is locked or unlocked when all doors are locked or unlocked
with the key, transmitter (or smart key) or central door lock switch.
If unlocked, the tailgate can be opened by pres ...
Intake Actuator: Components and Components Location
Component Location
...