Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Loose screws (2EA) holding the rear combination lamp then
disconnect the connector (A) then remove the outside rear combination
lamp (B). |
3. |
Turn the socket counterclockwise to remove the tail/stop lamp bulb (A). |
4. |
Loosen the nuts (A) after removing the tailgate lamp cover. |
5. |
Remove the tailgate lamp after disconnecting the connector (B). |
6. |
Turn the socket counterclockwise to remove the back up lamp bulb (A) and tail lamp bulb (B). |
7. |
If the bulbs should be only replaced without removing lamp
assembly, replace the back up lamp bulb (A) and tail lamp bulb (B) after
removing the tailgate lamp cover inside tailgate. |
Installation |
1. |
Install the tailgate combination lamp assembly after assembling the bulb. |
2. |
Install the lamp cover to the tailgate after connecting the lamp connector. |
3. |
Install the rear combination lamp assembly after assembling the bulbs and connecting the lamp connector. |
Intake Manifold: Repair procedures
Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal (A).
Tightening torque
4.0 ~ 6.0N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.4lb-ft)
3.
Remove the ai ...
Curtain Airbag (CAB) Module: Description and Operation
Description
Curtain airbags are installed inside the headliner (LH and
RH) and protect the driver and passenger from danger when side crash
occurs. The SRSCM determines deployment of curtain ai ...