Kia Sportage: Rear Washer Motor: Repair procedures - Rear Wiper/Washer - Body Electrical System - Kia Sportage SL Service & Repair ManualKia Sportage: Rear Washer Motor: Repair procedures

Third generation SL (2010–2016) / Kia Sportage SL Service & Repair Manual / Body Electrical System / Rear Wiper/Washer / Rear Washer Motor: Repair procedures

Inspection
1.
With the washer motor connected to the reservoir tank, fill the reservoir tank with water.
   
Before filling the reservoir tank with water, check the filter for foreign material or contamination. if necessary, clean the filter.
2.
Remove the front bumper cover.
(Refer to the BD group - "Front bumper")
3.
Connect positive (+) and negative (-) battery cables to terminals 2 and 1 respectively to see that the washer motor runs and water is pumped.
4.
Check that the motor operates normally.
Replace the motor if it operates abnormally.

No
Description
No
Description
1
GND
2
Washer (+)

Rear Washer Switch: Repair procedures
Inspection Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and washer switch. Rear Wiper Switch Rear Was ...

Electro chromic Inside Rear View Mirror
...

Other Information:

Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in impro ...

Before entering vehicle
Be sure that all windows, outside mirror(s), and outside lights are clean. Check the condition of the tires. Check under the vehicle for any sign of leaks. Be sure there are no obstacles behi ...

Categories


Copyright © www.kispmanual.com 2014-2024